| 除油防锈液的特点和使用方法 |
| 添加时间：2019/11/7 13:59:36 浏览次数： |
| 跟除油剂不同的是，除油除锈防锈液除油、除锈、防锈一步完成，除锈功能强，且有除氧化皮的功能。节省设备、人力，常温使用，仅需一槽即可完成除锈防锈处理。 除油剂只能除油，除油除锈防锈液不仅能除油还能除锈使用异常方便，缺点是在晒干，吹干烘干的过程中，工件不能有重叠，互相接触，且表面液体应沥净后再晾干。 Different from the oil remover, the oil remover, rust remover and rust remover can remove oil, rust and rust in one step, with strong rust removal function and oxide skin removal function. Save equipment, manpower, use at normal temperature, only one tank can complete rust removal and rust prevention treatment. Oil remover can only remove oil. Oil remover, rust remover and antirust solution can not only remove oil, but also remove rust easily. The disadvantage is that in the process of drying in the sun, drying by blowing, the workpieces cannot overlap and contact each other, and the surface liquid should be drained before drying. 配液在塑料桶或塑料池中将磷化液与水按1：2(重量比)配成磷化液。常温浸泡使用，浸泡除油除锈防锈液20分钟以上(至油锈除掉为止)，沥净，干燥 ，涂装。 Prepare phosphating solution in plastic bucket or plastic pool according to 1:2 (weight ratio) of phosphating solution and water. Soak at room temperature, soak the rust remover for more than 20 minutes (until the rust is removed), drain, dry and paint. |
| 上一页 铝材防腐蚀处理应选用具有除油功能的钝化剂或氧化剂 |
| 下一页 除油剂最基本的特性，也是十分重要的特性 |
Copyright © 技术支持：遨游网络