| 酸性除油剂 |
| 添加时间：2018/11/6 16:54:56 浏览次数： |
| 酸性除油剂是由喷雾,浸泡或超声波方法,在高温下。大部分酸性除油剂工作温度在20到90摄氏度的范围工作温度是非常重要的,在较低温度下清洗的持续时间缩短。经营酸性脱脂池浸泡时间为5到10分钟化学浓度的百分之三到百分之十。根据油型的金属类型的油脂,所以处理的时间可以有所不同。 Acidic degreasing agent is made by spray, soak or ultrasonic method at high temperature. Most of the acidic degreasing agent working temperature in the range of 20 to 90 degrees Celsius temperature is very important, the duration of cleaning at low temperature is shortened. The soaking time of acid degreasing tank is 5 to 10 minutes, three percent to ten percent of chemical concentration. According to the oil type of metal type grease, so the processing time can be different. 酸性化学脱脂除油常用的是超声波浴,清洗效果由超声波振动高的援助的。化学浓度范围在2-5％ 时间为3到6分钟分钟。所有这些值取决于油脂型/表面油对金属。除油在酸性溶液中参数是化学浓度,处理时间,温度和总碱度。影响除油硬度的水。在清理案件即使所有是最优的,脱脂添加剂可以用来改善脱脂效果。通过特殊的有机溶剂和表面活性剂的添加,使其对皂化性和非皂化性油脂都具有独到的去除效果。可单独兑水使用,用作常温脱脂和除油用,可直接添加到酸液中使用,使脱脂与除锈一次性完成,并可抑制酸雾,防止过腐蚀,这样可以延长酸性除油剂的使用寿命。 Acid chemical degreasing and degreasing are often used in ultrasonic bath, and the cleaning effect is highly aided by ultrasonic vibration. The chemical concentration ranges from 2-5% to 3 to 6 minutes. All these values depend on the oil / surface oil on the metal. The parameters of degreasing in acid solution are chemical concentration, treatment time, temperature and total alkalinity. Water that affects the hardness of deoiling. Degreasing additives can be used to improve the degreasing effect even if all cases are optimal. By adding organic solvent and surfactant special, which is unique to the removal effect of saponification and non fat saponification. Can be diluted with water, used as a degreasing and removing oil, can be directly added to the acid solution, the degreasing and derusting once completed, and can inhibit the acid mist, to prevent corrosion, it can prolong the service life of the acidic degreasing agent. |
| 上一页 除油剂 |
| 下一页 除油剂的组成 |
Copyright © 技术支持：遨游网络