1、配置水温引荐：推荐使用30℃以上的温水制造工作液；

1, the allocation of water temperature recommended: recommended use of more than 30 degrees of warm water to make working fluid;

2、使用浓度推荐：对于轻中油污用自来水配制成3%—5%的工作液；对于重油污建议使用浓度为10%—15%；

2, the use of concentration recommended: for light medium oil pollution with tap water to make up 3% - 5% of the working fluid; for heavy oil pollution, the recommended concentration of 10% - 15%;

3、使用温度推荐：关于轻中油污或钢铁工件的油污，主张常温运用

3, the use of temperature recommended: on the light medium oil pollution or steel workpiece oil pollution, advocate the use of normal temperature

4、除油后应当水洗或热水漂洗洁净；

4. After oil removal, it should be washed by water or rinsed with hot water.

5、施工办法推荐：浸泡清洁、超声波清洁、手工清洁、密闭滚筒清洁皆可。

5, the construction method recommended: soaking cleaning, ultrasonic cleaning, manual cleaning, closed cylinder cleaning all can.